Hioki PD3129 Phase and Rotation Meter New from Japan 4536036004621
Condition : USED , Tested fully working, good condition. Please ask detailed condition and accessories before bidding.
Brand : HIOKI
Model Number : PD3129
Size :
Weight : 500 g
ShippingWeight: 500 g
Description :
DescriptionNon Contact Phase Rotation Meter
Non-Metallic Contact for Optimal Safety
Top primary supply level safety class rating for phase detectors
CAT III 600V design meets CE Mark qualifications.
Provides both visual and audible phase detectionPhase and Rotation Meters For Thin Conductors For Thin Conductors Measurable Cable Diameter 2.4mm to 17mm Safety CATIII 600 V LED Phase Sequence Indication CAT III 600V design Visual and audible phase detection Phase Detection on Insulated cables Auto Power OffNon-Metal Contact Phase DetectorTo resolve these issues, the new Model PD3129 clips over the outside of conductors? insulation, enabling safe and easy phase detection at any point along the conductors. Four LEDs light in sequence to clearly indicate phase relationships even in dark environments, and positive or reverse phases can be indicated both visually and by an audible beeper.The clips attach to conductors of up to 17 mm diameter at voltages between 100 and 600 V. To avoid battery depletion worries in the event that the operator neglects to turn the detector off, an auto-power-off feature turns it off about 15 minutes after turn-on. Continuous operating time on two common AA batteries is as long as 70 hours.No-metal-contact design For the ultimate in safety. Include in Visual Reports A green arrow indicates normal phase, which can be communicated in an easy-to-understand manner by including the phase detector in photographs used to document the proper completion of electrical work. Safe, no-metal-contact design The no-metal-contact clips need only to be clipped to the outside of each wire\'s insulation, letting you carry out phase detection work safely. Auto power off The flashing phase sequence lamps, arrow LED, and tone let you easily and intuitively verify the phase sequence of three-phase power supplies. Battery check function A flashing lamp indicates when the batteries are low so that you can avoid having the detector turn off abruptly.
hrK_14_2011_23_4536036004621_LTE
_d2825
Condition : USED , Tested fully working, good condition. Please ask detailed condition and accessories before bidding.
Brand : HIOKI
Model Number : PD3129
Size :
Weight : 500 g
ShippingWeight: 500 g
Description :
DescriptionNon Contact Phase Rotation Meter
Non-Metallic Contact for Optimal Safety
Top primary supply level safety class rating for phase detectors
CAT III 600V design meets CE Mark qualifications.
Provides both visual and audible phase detectionPhase and Rotation Meters For Thin Conductors For Thin Conductors Measurable Cable Diameter 2.4mm to 17mm Safety CATIII 600 V LED Phase Sequence Indication CAT III 600V design Visual and audible phase detection Phase Detection on Insulated cables Auto Power OffNon-Metal Contact Phase DetectorTo resolve these issues, the new Model PD3129 clips over the outside of conductors? insulation, enabling safe and easy phase detection at any point along the conductors. Four LEDs light in sequence to clearly indicate phase relationships even in dark environments, and positive or reverse phases can be indicated both visually and by an audible beeper.The clips attach to conductors of up to 17 mm diameter at voltages between 100 and 600 V. To avoid battery depletion worries in the event that the operator neglects to turn the detector off, an auto-power-off feature turns it off about 15 minutes after turn-on. Continuous operating time on two common AA batteries is as long as 70 hours.No-metal-contact design For the ultimate in safety. Include in Visual Reports A green arrow indicates normal phase, which can be communicated in an easy-to-understand manner by including the phase detector in photographs used to document the proper completion of electrical work. Safe, no-metal-contact design The no-metal-contact clips need only to be clipped to the outside of each wire\'s insulation, letting you carry out phase detection work safely. Auto power off The flashing phase sequence lamps, arrow LED, and tone let you easily and intuitively verify the phase sequence of three-phase power supplies. Battery check function A flashing lamp indicates when the batteries are low so that you can avoid having the detector turn off abruptly.
hrK_14_2011_23_4536036004621_LTE
_d2825
If you have any issues with the products and need some assistance, please contact us through our mail or contact form within 14 days of purchase and we will make sure you are taken care of properly.A Return Merchandise Authorization (RMA) number is required for all returns.In the event that we or our carriers are responsible (Damaged during shipping, defective,...etc.), we will either ask you to return the product or send out a replacement.
