CANON MK2600 Cable ID Printer

CANON MK2600 Cable ID Printer Condition : Brand NEW Brand : canonModel Number : Mk2600Size : Weight : 2kgDescription : Amazingly fast, easy and clear! Bringing tremendous improvement in work efficiency!The MK2600 prints precise characters of up to 300dpi for tubes, labels and more. With a large LCD display and automatic full and half-cutting, it offers smooth and easy printing from start to finish.Character sizes: 2, 3, 6mmPrint speed (tubes): up to 240cm per minuteStandard output rate 42pcs./min.* *20mm tube, 5 full-size characters, consecutive print mode, fast cuttingPrinting up to trailing edge of tubeThe MK series printers can print characters up to the edge of each tube to avoid tube waste. This contributes to long-term cost reduction.Automatic cutting / full-cut is also possibleEach segment is partially cut automatically as it prints. The segments are easily separated manually after they come out of the printer. The cutting operation for each job can be set for full-cut, half-cut, no cut with marking, or no cut without marking.Consecutive / serial printingMK series printers can be set to print the same text on every segment (consecutive printing). Just enter the data and the number of segments required, then start the print. Or, MK series printer can be set to print numbers that increment automatically as the segments print (serial printing). No need to do separate entries and printing for each segment!Specifications for MK2600Printing Method : Thermal transferResolution : 300dpiPrinting Speed Tubes: High speed: 40mm/sec.Middle speed: 25mm/sec.Low speed: 18.5mm/sec. Labels: High speed: 40mm/secs.Middle / Low speed: 25mm/secs.Output Rate High speed: About 42pcs./min. Middle speed: About 35pcs./min. Low speed: About 30pcs./min. Printing 20mm tubes, 5 full-size characters, consecutive print mode, half-cutting.Ink Ribbons (Exclusive cassette) Black: 100m White: 85m Black for Marking Strip: 40mCharacter Sizes : 1.3mm (only full-width available), 2mm, 3mm, 6mm (full-width, half-width available for each)Input Modes : Alphanumeric, symbol inputDisplay : LCD Graphic (160 x 64 dots)Display Capacity : 10 characters/line x 2 lines (full-width) or 20 characters/line x 2 lines (half-width) (3 lines editing is possible.)Built-in Memory Print-data: Approx. 5.000 characters Files: Approx. 60,000 characters,10Folders(Each can save upto99 files) Service life of internal backup battery for data storage: About 5 yearsMedia Cutting Method : Automatic full-cutting, Automatic half-cuttingPower Supply : Exclusive AC Adapter Input voltage: AC 100V - 240V 50 / 60HzPC Interface : USB2.0 Full-Speed, Exclusive PC Connection Kit (Included)Operating Environment : 15°C - 32.5°C (59°F - 90.5°F), 10% - 85% RH Range is lowered to 5°C (41°F) with Tube Warmer option installedStorage Environment : 5°C - 35°C (41°F - 95°F), 10% - 90% RHDimensions (W x D x H) : 250 x 300 x 85mm (9.8 x 11.8 x 3.4in.)Weight : 2kg (4.4lb.) (printer only)Tube : PVC tube, φ 2.5 - 6.5mm, 0.5mm thick Tube attachment option is required (Other tubes should be tested for printing.)Label Tape (Exclusive cassettes (White, Yellow, Silver)) Width: 6mm, 9mm, 12mm Length: 30m (Silver: 27m) Segment length can be set to 2mm through 150mmWrap Around Tape: Exclusive cassettes Print area only: White Other areas: Transparent Take-up length: 8m Length: 33mm Width: 6 - 150mm (depends on cut setting)Marking Strip Specified thickness 0.5mm Plates of other thickness should be tested for printing Width: 8mm, 8.5mm, 9mm, 9.5mm, 10mm Plate Attachment option is required Exclusive ribbon cassette is required Manual cut onlyHeat Shrink Tube Shrink tube: φ 3.0 - 6.4mm Tube attachment option is required. (Other tubes should be tested for printing.)4mm ID Strip (Exclusive Cassette (White, Yellow)) Width: 4mm Length: 5m Segment length can be set to 8mm through 150mm RSK_1710_23